The LED lamps appearing on the market now should be directly connected to 220V power supply. The control power supply is inside the lamp tube.
LED fluorescent lamp, does not need ballast, led lamp tube of up converter, has no stroboscopic, no ultraviolet ray, does not attract mosquitoes, which is the place where fluorescent lamps can't compare with before.
The most prominent thing about led lamp tube is its long service life. The theoretical service life is more than 50000 hours, which is dozens of times that of fluorescent lamp tube, and the display index of led lamp tube is as high as over 80, the color of led lamps is not distorted, and the color temperature can be controlled as needed.
Led lamps are usually divided into warm White, positive white and cold white, and red, yellow, blue and green can be customized as required, other color led tubes such as RGB use CREE and AOD ultra-high brightness LED white light as the light source, and the shell is acrylic/aluminum alloy. Replacement method: directly remove the light source of the traditional fluorescent lamp bracket, cut off all the output input lines of the ballast, and then pull one of the 200V wires to the fixed lamp holder, one to the other to the fixed lamp holder at the other end, and connect it with the one just cut off, wrap the insulating tape and install the LED fluorescent lamp.
It's okay to go to the town. Anyway, he doesn't work now, and he doesn't consume electricity.
Although the inductive ballast is retained, the LED fluorescent lamp can still be lit, but the high-voltage surge generated at both ends of the inductive ballast will flow to the LED circuit to cause unpredictable damage.
It has adverse effects on the service life and light decay of LED fluorescent lamps. 2.
For the extra power consumption, this inductive ballast has a considerable voltage drop, which will increase the unnecessary energy consumption by about 20%. 3. The removed inductive ballast can be recycled.
It should be known that the traditional inductive transformer has a high copper content, and the benefits generated by recycling are sufficient to pay the wages for disassembly.
It can be agreed with the owner in advance that the waste will be recycled and cleaned up by the construction unit.
In summary, there are thirteen major advantages: 1.
Environmentally friendly lamps protect the earth. Traditional fluorescent lamps contain a large amount of mercury vapor, which will volatilize into the atmosphere if broken.
However, LED fluorescent lamps do not use mercury at all, and LED products do not contain lead, which protects the environment.
LED fluorescent lamps are recognized as green lighting in the 21st century. 2.
Efficient Conversion and reduction of heating traditional lamps will generate a large amount of heat energy, while LED lamps convert all electric energy into light energy without causing waste of energy.
Moreover, for documents, clothes will not fade. 3.
Quiet and comfortable, no noise LED lamps will not produce noise, and it is a good choice for occasions where precision electronic instruments are used. Suitable for libraries, offices and the like. 4.
The light is soft and protects the eyes. Traditional fluorescent lamps use alternating current, so they produce 100-120 stroboscopic flashes per second.
LED lamps directly convert alternating current into direct current, which will not cause flicker and protect eyes. 5.
No ultraviolet rays, no mosquito LED lamps will not produce ultraviolet rays, so there will not be many mosquitoes around the lamp source like traditional lamps. The room will become cleaner, cleaner and tidy. 6.
Voltage adjustable 80 V-245 V traditional fluorescent lamps are lit by the high voltage released by the rectifier, and cannot be lit when the voltage drops.
However, LED lamps can be lit within a certain range of voltage, and the brightness can be adjusted. 7.
It saves energy and has a longer service life. The power consumption of LED fluorescent lamps is less than 1/3 of that of traditional fluorescent lamps, and its service life is 10 times that of traditional fluorescent lamps. It can be used for a long time without replacement and reduces labor costs. It is more suitable for occasions that are difficult to replace. 8. Strong and reliable, long-term use.
The LED lamp body itself uses epoxy resin instead of traditional glass, which is firmer and more reliable. Even if it hits the floor, the LED will not be easily damaged and can be used with confidence. 9.
Compared with ordinary fluorescent lamps, LED fluorescent lamps do not need ballasts, start-ups and stroboscopic devices. 10.
Maintenance-free, frequent switching will not cause any damage. 11.
The LED fluorescent lamp with external isolated power supply is completely a safe lamp.
Safe and stable quality can withstand 4kv high voltage and low heat dissipation and can work at low temperature-30 ° C high temperature 55 ° C. 12.
No ultraviolet radiation will have no effect on the surrounding environment.
No ultraviolet and infrared rays, no harmful materials such as mercury, eye protection and no noise. 13.
Non-glass products are not easy to break, impact resistant, vibration resistant and vibration resistant, and easy to transport.
Scope of application of LED lamps: lighting houses, buses, supermarkets and offices;
Parking lot office buildings, factories, shopping malls, schools, homes and other indoor lighting. The single most important quality you'll need as Zhongshan Leimove Lighting and Electrical Co.,Ltd. is 'stick-to-it-iveness' or grit, a combination of perseverance, patience and adaptability. Zhongshan Leimove Lighting and Electrical Co.,Ltd.’s mission is to use our extensive led light solution experience to deliver tangible business results enabling our clients in industry and government to profit from the advanced use of technology. We strive to build long-term client relationships based on mutual trust and respect. Along the way, Zhongshan Leimove Lighting and Electrical Co.,Ltd. will face a wide range of challenges. The most successful will show our resolve by working through the challenges and finding ways to improve and grow.